Makita DFT044F Instruction Manual
Hide thumbs
Also See for DFT044F:
- Instruction manual (65 pages) ,
- Instruction manual (53 pages) ,
- Instruction manual (57 pages)
Related Manuals for Makita DFT044F
Summary of Contents for Makita DFT044F
- Page 1 INSTRUCTION MANUAL Cordless Screwdriver DFT022F DFT044F DFT084F DFT126F 013043 IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 70 dB (A) or less Designation of Machine: Uncertainty (K) : 3 dB (A) Cordless Screwdriver The noise level under working may exceed 80 dB (A). Model No./ Type: DFT022F, DFT044F, DFT084F, DFT126F Conforms to the following European Directives: Wear ear protection 2006/42/EC... -
Page 3: General Power Tool Safety Warnings
The technical file in accordance with 2006/42/EC is moving parts. Damaged or entangled cords available from: increase the risk of electric shock. Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use 19.3.2015 of a cord suitable for outdoor use reduces the risk of electric shock. -
Page 4: Cordless Screwdriver Safety Warnings
18. Do not use the power tool if the switch does 29. Follow instruction lubricating not turn it on and off. Any power tool that changing accessories. cannot be controlled with the switch is dangerous 30. Keep handles dry, clean and free from oil and and must be repaired. -
Page 5: Functional Description
Avoid storing battery cartridge in a FUNCTIONAL DESCRIPTION container with other metal objects such as nails, coins, etc. Do not expose battery cartridge to water CAUTION: or rain. Always be sure that the tool is switched off and the • A battery short can cause a large current flow, battery cartridge is removed before adjusting or overheating, possible burns and even a... -
Page 6: Led Indicator
5 seconds. When the tool is used with the battery that has not been used for a long time and is switched on, no lamps may light up at all. Use Makita refreshing adapter to refresh the battery. Switch action... - Page 7 The LED indicator on the tool shows the following functions. Status of the LED indicator/beeper Function Status Action to be taken LED indicator Beeper This function works when the tool has reached the preset fastening torque and normal Auto-stop fastening tightening has been completed.
-
Page 8: Operation
Adjusting the fastening torque ASSEMBLY 1. Adjusting grip CAUTION: 2. Ring Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or socket bit 12mm(15/32") 013092 When you wish to drive machine screws, wood screws,... -
Page 9: Maintenance
If you need any assistance for more details regarding MAINTENANCE these accessories, ask your local Makita Service Center. Makita genuine battery and charger • Adjust grip •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885443-221...