Specifications - Makita DDF343 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DDF343
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Model
Steel
Wood
Wood screw
Machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
) : 70 dB (A) or less
pA
DDF343
10 mm
25 mm
5.1 x 63 mm
192 mm
1.4 kg
D.C. 14.4 V
END004-4
Model DDF453
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENE034-1
WARNING:
The vibration emission during actual use of the
•
ENG905-1
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
DDF453
13 mm
36 mm
6 mm x 75 mm
6 mm
0 - 1,300
0 - 400
214 mm
1.6 kg
D.C. 18 V
) : 72 dB (A)
pA
Wear ear protection
2
) : 2.5 m/s
h,D
2
ENG900-1
or less
ENG901-1