Further Settings For The Wireless System - Sony BDV-N9200WL Operating Instructions Manual

[Break]
Moves the cursor to the next line in the text
input field.
[Delete]
Erases one character on the left side of the
cursor during text input.
Further Settings for the
Wireless System
You can make further settings for the
wireless system by using the [Wireless
Sound Connection] settings.
1
Press HOME.
The home menu appears on the TV
screen.
2
Press B/b to select
3
Press V/v to select [System
Settings], then press
4
Press V/v to select [Wireless
Sound Connection], then press
The [Wireless Sound Connection]
display appears.
• [Secure Link] (page 53)
• [RF Band]* (page 54)
• [RF Channel] (page 54)
* This function may not be available in
some countries/regions.
Activating wireless
transmission between
specific units
[Secure Link]
You can specify the wireless connection
to link the main unit to the surround
amplifier using the Secure Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
1
2
3
4
5
6
[Setup].
.
.
To cancel the Secure Link function
For the main unit
Select [Off] on Step 3 above.
For the surround amplifier
Hold down SECURE LINK on the rear of
the surround amplifier until the LINK/
STANDBY indicator turns green or
flashes green.
Select [Wireless Sound
Connection] in [System Settings]
(page 53).
Press V/v to select [Secure Link],
then press .
Press V/v to select [On], then
press .
Press SECURE LINK on the rear of
the surround amplifier.
Proceed to the next Step within a
few minutes.
Press B/b to select [Start], then
press .
To return to the previous display,
select [Cancel].
After the message [Secure Link
setting is complete.] appears,
press .
The surround amplifier is linked to
the main unit and the LINK/
STANDBY indicator turns orange.
If the message [Cannot set Secure
Link.] appears, follow the on-screen
messages.
53
GB