Table of Contents
Advertisement
Network
Configures the network settings.
• Default settings are underlined.
Information
Displays the network information on the unit.
Status
The connection status of the NETWORK jack
Connection
Connection method
SSID
The access point to which the unit is connected
Security
The encryption method for your network
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
vTuner ID
The ID of the Internet radio (vTuner)
Network Connection
Selects the network connection method.
Choices
Select this option when you want to connect the unit to a network
Wired
with a commercially-available network cable.
Select this option when you want to connect the unit to a network
Wireless (Wi-Fi)
via the wireless router (access point). For details on settings, see
"Connecting the unit to a wireless network" (p.33).
Select this option when you want to connect a mobile device to
Wireless Direct
the unit directly. For details on settings, see "Connecting a mobile
device to the unit directly (Wireless Direct)" (p.40).
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters
Off
manually. For details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network
On
parameters (such as IP address).
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (q/w) to select a parameter type.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
To exit from the menu, press SETUP.
92
En
Advertisement
Table of Contents
