Table of Contents
Advertisement
70
Lower Oven Care and Cleaning
The oven door with Luxury-
Hold™ hinges
To replace the Lift-Off oven door
1. Firmly grasp the oven door along both sides
just below the door handle. When positioning
the door hinge arms with the door hinge slots in
the oven frame, you may wish to use your knee
to stabilize the door before attempting to insert
the door hinge arms in the hinge slots -Fig. 1-.
2. Position the angle of the door to the door
removal angle and carefully insert the door
hinge arms fully and evenly into the door
hinge slots. Carefully let the weight of the door
transfer from your hands so that the oven now
supports the oven door.
3. Open the oven door down to the fully open
position -Fig. 2-. With the door in the fully open
position, push both oven door hinge locks
toward the oven frame until they both are
locked -Fig. 3-.
4. Close the oven door.
Special door care instructions
IMPORTANT
Most oven doors contain glass that can
break. Read the following recommendations:
•
Do not close the oven door until all the interior
oven racks are fully inserted and retracted to
the back of the oven. Do not hit the glass with
pots, pans, or any other object. The oven door
glass may break or even break at a later time
unexpectedly. Scratching, hitting, jarring or
stressing the oven door glass may weaken its
structure causing an increased risk of breakage
at a later time.
•
You may use a glass cleaner on the outside
of the oven door glass. Do not spray or allow
water or the cleaner to enter or drip down into
the oven door vents. Spray cleaner on cloth
first and then wipe the oven door clean.
•
Do not use strong oven cleaners, powders or
any harsh abrasive cleaning materials on the
outside of the oven door or glass. Never clean
the oven door gasket. The oven door gasket
should always clean during the Self-clean
cycle.
Fig. 1
Fig. 2
Fig. 3
Advertisement
Table of Contents
