Table of Contents
Advertisement
Changing settings
Software controls the micro and lower ovens
so that both may be set to operate at the same
time with unique settings. It is very important to
understand that before setting or modifying either
oven, you must first select which oven you desire
to set or modify. The display will provide which
oven is currently selected for setting/changes
by displaying a small red triangle indicator next
to the micro or lower oven text.If the micro oven
text symbol displays the red triangle indicator
but you wish to set or change the settings for the
lower oven, press
once to change the oven
selection -Fig.1-. Then make the setting/changes.
You may toggle between either oven and make
setting changes at any time except when you are
currently setting a cooking mode.
Fig.1
Sleep mode
Awake mode
Getting Started
Display modes
Sleep mode
Your control will remain in a sleep mode when not
in use, unless there is a hot element -Fig.2-. Only
the clock will display during this mode. You will
need to wake the control to begin any function.
Awake mode
To awake the control touch within the display panel
-Fig. 3-. If the control panel is not touched again
within 2 minutes, the control will return to the sleep
mode. To start cooking you must select either the
micro oven or the lower oven. User preferences
will be available during this mode as well as timers,
oven light and the control lock.
17
Fig.2
Fig.3
Advertisement
Table of Contents
