Whirlpool WED9620HW Installation Instructions Manual page 24

4.
Remove hinge and latch
Using a T25 screwdriver, remove the 3 screws securing the
®
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
5.
Reinstall hinge and latch
on opposite sides
Using a T25 screwdriver, reinstall the latch plate and latch
®
backing plate with the 3 screws removed earlier and the hinge
assembly with the 5 screws on the opposite sides from which
they were removed.
24
Latch
Hinge
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
7.
Reinstall door on dryer
Using a T25 screwdriver, remove the 4 screws on the dryer.
®
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the 4 T25
screws removed earlier.
Bottom
of door
®