Points For Attention - GCE Horus Operational Manual

7. POINTS FOR ATTENTION

•
Be sure that the helmet is to be used in correct condition and check it according to WARNING content.
•
There is liquid crystal-valve in the filter, although it has inner and outer protection plate, it is important
to avoid heavy knock to break.
EN
•
The outer protection plate of helmet should be periodically inspected and cleaned, keep it clear. In case
break, crack, pitting or more serious influencing vision effect occurs, the plate must be replaced.
•
In order to operate more efficiently and safely, please select correct dark shade number.
•
If the filter is not water-proof model, please pay attention to preventing from water.
•
Be sure that the arc light must be received completely by sensor, if not, the filter will be light or unstable
in darkness to damage the person.
•
Please use the automatic filter at temperature between -1 0°C ~ 65°C (1 4°F ~ 1 49°F )
•
Please don't disassemble the filter, any problems arising, please contact our company or agent.
8. CONSTRUCTION AND ASSEMBLY SCHEME
Construction and assembly scheme See fig. 1 at the end of this manual.
1
Outer protection plate
2
Helmet shell
3
Block nut
4
Automatic filter
5
Shade knob
6
Inner protection plate
7
Frame
8
Fixing screw for frame
9. SHADE SELECTION TABLE
See table at the end of this manual.
Note: Shade selection table from standard EN 1 69.
1 0. DISPOSAL
This device meets the requirements of the relative directives concerning the environmental
protection (2002/96/EC, 2003/1 08/EC, 2002/95/EC).
At the end of the products life cycle it must be disposed of according to the regulations
concerning special waste collection as it cannot be treated as normal urban refuse.
The product is made up of materials that are both non-biodegradable and of potentially polluting
substances to the environment if not disposed of correctly.
1 1 . WARRANTY
Made in China. GCE offers a 2 year warranty against defects in materials and manufacturing.
The complete Warranty conditions are described in the GCE Guarantee Certificate which is available on
the GCE website.
9
Sensitivity knob
1 0
Delay knob
1 1
Screw for fixing headband
1 2
Headband tightness adjusting knob
1 3
Headband adjusting band
1 4
Segmental positioning plate
1 5
Sweat band
1 6
Positioning point for the segmental plate
4/1 6