Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the
unit. Depending on the video/audio output jacks available on your video device, choose one of
the following connections. We recommend using an HDMI connection if the video device has
an HDMI output jack.
Y
The following explanation is based on the assumption that you have not changed the "Input Assignment" setting
(p.137) in the "Setup" menu. As necessary, you can assign the COMPONENT VIDEO (A, B), COAXIAL (3, 4, 5)
and OPTICAL (1, 2, 6) jacks to another input source.
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the "Audio Select" setting (p.109) in the "Option" menu.
■ HDMI connection
Connect a video device to the unit with an HDMI cable.
HDMI (AV 1-7) jacks
The unit (rear)
HDMI (HDCP2.2) NE
I OUT
CP2.2)
1 AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
ARC (1 BD/DVD)
TRIGGER
AV 3 AV 4 COMPONENT VIDEO
AV 1 P P OUT
Y B R
A
1
REMOTE
12V 0.1A
IN OUT
MAX. TOTAL
2
B
Y AV 2 P B P R
ZONE OUT PRE OUT (SINGLE)
1
2
ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER CENTER
6 OPTICAL
SPEAKERS
EXTRA SP2 EXTRA SP1
R SURROUND L R L R L CENTER
SURROUND BACK F.PRESENCE
SINGLE
ZONE 2 ZONE 2/BI-AMP
If you select the input source by pressing AV 1-7 on the remote control, the video/audio played
back on the video device will be output from the unit.
HDMI output
HDMI
Video device
34
En
■ Component video connection
Connect a video device to the unit with a component video cable and an audio cable (digital
coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio
output jacks available on your video device.
Output jacks on video device
Video Audio
Digital coaxial
Component video
Analog stereo
AV 1-2 (COMPONENT VIDEO) jacks
Y
The unit (rear)
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2) AV 1 AV 2 AV 3 AV 4
2 1
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD)
Y AV 1 P P
B R
A
VIDEO
B
Y AV 2 P B P R
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV) ZONE OUT PRE OUT
L L (SINGLE)
R R
ZONE 2
1 2 3 4 6 FRONT SURROUND SUR. BACK
GND OPTICAL OPTICAL COAXIAL COAXIAL 5 COAXIAL OPTICAL
EXTRA SP2
R SURROUND L R
SURROUND BACK
ANTENNA
(4 RADIO)
FM AM
75
ZONE 2
AV 1-2 (COAXIAL) or
AV 1-2 (AUDIO) jacks
If you select the input source by pressing AV 1-2 on the remote control, the video/audio played
back on the video device will be output from the unit.
X
To connect a video device to the unit with a component video cable and a digital optical cable, use "Input
Assignment" (p.137) in the "Setup" menu to assign the COMPONENT VIDEO and OPTICAL jacks to the same input
source.
Input jacks on the unit
AV 1-2 (COMPONENT VIDEO + COAXIAL)
AV 1-2 (COMPONENT VIDEO + AUDIO)
P P
B R
AV 5 AV 6
TRIGG
OUT
1 Video output
12V 0.1A
MAX. TOTAL
(component video)
2
1
2 Y P
B
SUBWOOFER CENTER
SPEAKERS
EXTRA SP1
L R
F.PRESENC
SINGLE
ZONE 2/BI-AM
COAXIAL
Video device
L
R
Audio output
(digital or analog stereo)
P
R