Dsp Program Menu Items - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

DSP Program menu items

X
• Available items vary depending on the selected sound program or surround decoder.
• Default settings are underlined.
■ Settings for sound programs
Item
Selects a surround decoder to be used in
Decode Type combination with the selected sound
program.
DSP Level Adjusts the sound field effect level.
Adjusts the delay between the direct
sound and presence sound field
Initial Delay
generation.
Adjusts the delay between the direct
Surround Initial Delay sound and surround sound field
generation.
Adjusts the delay between the direct
Surround Back Initial
sound and surround back sound field
Delay
generation.
Adjusts the broadening effect of the
Room Size
presence sound field.
Adjusts the broadening effect of the
Surround Room Size
surround sound field.
Adjusts the broadening effect of the
Surround Back Room Size
surround back sound field.
Adjusts the loss of the presence sound
Liveness
field.
Adjusts the loss of the surround sound
Surround Liveness
field.
Adjusts the loss of the surround back
Surround Back Liveness
sound field.
Function Settings
Auto, bDsur*, Neural:X, Neo:6
Cinema, Neo:6 Music*
(* Available only when
"SURROUND DECODER" is
selected)
-6 dB to 0 dB to +3 dB
Higher to enhance the sound
field effect, and lower to reduce
it.
1 ms to 99 ms
Higher to enhance the delay
effect, and lower to reduce it.
1 ms to 49 ms
Higher to enhance the delay
effect, and lower to reduce it.
0.1 to 2.0
Higher to enhance the
broadening effect, and lower to
reduce it.
0 to 10
Higher to enhance the
reflectivity, and lower to reduce
it.
Item
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Adjusts the delay between the direct
Reverb Delay
sound and reverberant sound generation.
Adjusts the volume of the reverberant
Reverb Level
sound.
117
En
Function Settings
1.0 s to 5.0 s
Higher to enrich the reverberant
sound and lower to have clear
sound.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
0% to 100%
Higher to strengthen the
reverberant sound, and lower to
weaken it.