Connecting A Tv - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

Connecting a TV

Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
■ HDMI connection
Connect the TV to the unit with an HDMI cable and an audio cable (digital optical or stereo pin
cable).
Y
You can connect another TV or a projector by using the HDMI OUT 2 jack (p.33).
HDMI OUT jack
HDMI OUT
(HDCP2.2)
2 1
The unit
(ZONE OUT) ARC
(rear)
HDMI OUT
(HDCP2.2)
2 1 AV 1 AV 2
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD) AV 1
Y P B P R
A
VIDEO
B
Y P P
AV 2 B R
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV) ZONE OUT
L L
R R
AUDIO 1
(2 TV)
ZONE 2 FRONT
GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL
R SURROUND L
ANTENNA
(4 RADIO)
FM
AM
75
1
OPTICAL
AUDIO 1
(OPTICAL or AUDIO) jacks
X
• You do not make an audio cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit's power
and volume with the TV's remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details
on the settings, see "Information on HDMI" (p.165).
HDMI input
HDMI
AUDIO
L
R
TV
OPTICAL
Audio output
(digital optical or analog stereo)
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
■ Connecting another TV or a projector
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with
an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the
remote control (p.60).
HDMI OUT 2 jack
HDMI OUT
(HDCP2.2)
2
The unit
(ZONE OUT)
ARC
(rear)
HDMI OUT
(HDCP2.2)
2 AV 1
1
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD) AV 1
Y
A
VIDEO
B
Y AV 2
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV) ZONE OUT
L L
R
R
ZONE 2
1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL
GND
R SURROUND
ANTENNA
(4 RADIO)
FM AM
75
Y
• HDMI Control is not available on the HDMI OUT 2 jack.
• If you set "HDMI OUT2 Assign" (p.136) in the "Setup" menu to "Zone2", you can connect a video monitor for
Zone2 to the HDMI OUT 2 jack and enjoy videos and audio using the video monitor (p.96).
33
En
1
TV
AV 2
P B P R
P P
B R
HDMI
HDMI input
FRONT
L
Projector
TV (already connected)