Mounting Options; Maintenance; Safety Considerations - Genelec 6010A Operating Manual

Desktop Control
The desktop low frequency control (switch
3) attenuates the bass frequencies around
200 Hz by 4 dB. This feature is designed to
compensate for the boost often occurring in
this frequency range when there is a table
or similar horizontal surface between the lis-
tener and the loudspeaker.

Mounting options

The 6010A offers several mounting options:
The Iso-Pod™ (Isolation Positioner/Decou-
pler™) vibration insulating table stand allows
tilting the loudspeaker for correct alignment
of the acoustic axis. A rigid wall bracket pro-
vided with the 6010A allows suspending the
loudspeaker on a wall in two different an-
gles. On the rear of the loudspeaker is a 3/8"
UNC threaded hole compatible with stand-
ard microphone stands and a wide range
of Genelec accessories. On the rear there
are also three pairs of threaded holes com-
patible with Omnimount
brackets. For a full list of available options,
please consult Genelec's accessories cata-
logue at www.genelec.com or contact your
Genelec dealer.

Maintenance

No user serviceable parts are to be found
within the amplifier unit. Any maintenance or
repair of the 6010A unit should only be un-
dertaken by qualified service personnel.

Safety considerations

Although the 6010A has been designed in
accordance with international safety stand-
ards, the following warnings and cautions
should be observed to ensure safe operation
and to maintain the loudspeaker under safe
operating conditions:
, VESA and Sanus
®
• Servicing and adjustment must only be
performed by qualified service personnel.
The loudspeaker must not be opened.
• Do not expose the loudspeaker to water
or moisture. Do not place any objects
filled with liquid, such as vases on the
loudspeaker or near it.
• This loudspeaker is capable of producing
sound pressure levels in excess of 85 dB,
which may cause permanent hearing
damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling.
Do not obstruct airflow around the
loudspeaker.
• Note that the amplifier is not completely
disconnected from the AC mains service
unless the mains power cord is removed
from the amplifier or the mains outlet.
Guarantee
This product is guaranteed for a period of
two years against faults in materials or work-
manship. Refer to supplier for full sales and
guarantee terms.
EC Declaration of Conformity
This is to certify that the Genelec Active Loudspeaker
6010A conforms to the following standards:
Safety:
EN 60065: 2002 + A1:2006 / IEC 60065:2001 7th
Edition + A1: 2005
EMC:
EN 55020 : 2002 + A1 : 2003
EN 55013: (2001)+ A1 : 2003
EN 61000-3-2 (2000)
EN 61000-3-3 (1995)
The product herewith complies with the requirements
of The Low Voltage Directive 2006/95/EC and EMC
Directive 2004/108/EC
Signed:
Ilpo Martikainen
Position: Chairman of the Board
Date: 15-May-2008