Digitus professional DS-55503 Manual

4k hdmi hdbaset extender set, 70m
Hide thumbs Also See for DS-55503:

Advertisement

Quick Links

4K HDMI HDBaseT Extender Set,
70m
Manual
DS-55503

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-55503 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Digitus professional DS-55503

  • Page 1 4K HDMI HDBaseT Extender Set, Manual DS-55503...
  • Page 2 Please read below safety instructions carefully before installation and operation: 1. Please pay attention to all the warnings and hints on this device. 2. Do not expose this unit to rain, moisture and liquid. 3. Do not put any stuff into the device. 4.
  • Page 3: Package Contents

    Package Contents TX Sender x1pcs RX Receiver x1pcs DC12V/2A x1pcs User manual x1pcs IR blaster extension IR receiver extension RS232 serial port cable x2pcs cable x2pcs cap ×2pcs Installation Requirements 1. HDMI source devices with HDMI OUTPUT interface 2. Display devices: With HDMI INPUT port 3.
  • Page 4: Panel Description

    Panel Description 1. TX Sender ① Power input Connect with DC 12V/2A power adapter (optional) 1. LED 1: It turns on when power on. 2. LED 2: It turns on when the transmitter unit and the receiver unit connect well with each other, and it flashes when there is no transmission between the transmitter unit Transmission signal ②...
  • Page 5 2. RX Receiver Connect with included DC12V2A power adapter (It is ① Power input recommended to power from the receiver unit) 1. LED 1: It turns on when power on. 2. LED 2: It turns on when the transmitter unit and the receiver unit connect well with each other, and it flashes when there is no transmission between the transmitter unit Transmission signal...
  • Page 6: Installation

    Installation 1. Connections Sender Receiver IR OUT IR OUT IR IN IR IN NOTE: It is recommended to power from the receiver unit 2. Bi-directional IR pass back 1) It supports bi-directional IR pass back. User can control DVD at RX end and control TV at TX end.
  • Page 7 2) Line order Check and make sure the RS23S serial line connect firmly and well, and make sure serial data line is connected correctly as below: If the RS232 serial does not work by following above connection, please try to change the order of TXD line and RXD line. GND line RXD line TXD line...
  • Page 8: Specification

    Specification Items Specifications Support HDMI2.0 HDCP2.2, support CEC and 24bits deep HDMI signal color Resolution Supported 480i/480P/576i/576P/720P/1080i/1080P/3D/4Kx2K Audio LPCM, DTS Digital, Dolby Digital Network cable CAT6, CAT6A, CAT7 CAT6 1080p@60Hz 48bpp, Transmission length CAT6A 1080p@60Hz 3D, 4Kx2K@60Hz CAT7 Support 20~60kHz wide frequency devices and IR control Bi-directional IR transmission Working temperature...
  • Page 9 No output on screen? 1) Firstly, please check and make sure the power supply is connected well. Then, check and make sure all cables are connected correctly. 2) Please check and make sure the right HDMI input port of the TV/screen has been chosen.

Table of Contents