Digitus professional DS-55100-1 Manual

Hdmi extender set, full hd

Advertisement

Quick Links

HDMI EXTENDER SET, FULL HD
Manual
DS-55100-1
The Digitus HDMI Extender Set, Full HD offers an extender solution of up
to 50 m for the highest demands. It is used to transmit digital video and
audio signals to a maximum length of up to 50 m. The highest supported
video resolution is 1080p / 60Hz. The transmitter unit features an EDID
switch, which can be used to regulate resolution and audio format of the
output signal. The transmitter also has an HDMI Loop Out Port, which
allows you to connect a local monitor. Thanks to PoC (Power over Cable)
support, it is only the transmitter unit that needs to be powered. The
package includes two bidirectional infrared units (transmitter, receiver),
which can be used for the remote control of the connected input source.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-55100-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Digitus professional DS-55100-1

  • Page 1 HDMI EXTENDER SET, FULL HD Manual DS-55100-1 The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 50 m for the highest demands. It is used to transmit digital video and audio signals to a maximum length of up to 50 m. The highest supported video resolution is 1080p / 60Hz.
  • Page 2 Important Safety Notice Please read below safety instructions carefully before installation and operation: 1. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster extension cable and IR receiver extension cable before installation. 2. Do not hot plug when it is working. 3.
  • Page 3 Specification Part No. DS-55100-1 Technical Transmitter-TX Receiver-RX HDCP compliance 1.2a Video bandwidth 225MHz(10.2Gbps) Video support 480I/P, 576I/P, 720P, 1080I/P, 3D Audio support PCM, AC3, DTS InputTMDS signal 1.2Vp-p InputDDC signal ESD protection EDID support loop-out on TX one HDMI loop-out on TX...
  • Page 4 Penal Description 1. Transmitter unit(TX) ① IR signal output to connect with ④ Reset button blaster extension cable ⑤ DC 5V power input ② RJ45 signal output ⑥ HDMI signal output ③ HDMI signal indicator led: it lights on ⑦ EDID switch all the time when HDMI signal input, ⑧...
  • Page 5 Installation and Connection 1. How to make a CAT6/6A/7 network cableFollow the standard of IEEE-568B: 1. How to make a CAT5/5E/6 network cake Follow the standard of IEEE-568B: 1- Orange/white 2- Orange 3- Green/white 4- Blue 5- Blue/white 6- Green 7- Brown/white 8- Brown 2.
  • Page 6 [NOTE] It is recommended to use a length range within 15~50m network cable. If the CAT6 cable is too short, there may be no display output because of the signal is too strong. If the CAT6 cable is too long,the output may be with poor quality. 4.
  • Page 7 Switch Status EDID information switch-1 switch-2 switch-3 720P@50Hz 2.1CH 720P@50Hz 7.1CH 1080i@60Hz 2.1CH 1080i@60Hz 7.1CH 1080P@60Hz 2.1CH 1080P@60Hz 7.1CH read and save the EDID of the loop-out TV Default EDID: 720P@60Hz 2.1CH Switch UP: use the Arabic numeral “1” to represent Switch DOWN: use the Arabic numeral “0”...
  • Page 8 This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures. Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.

Table of Contents