Table of Contents
Advertisement
Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1
Turn on the set-top box or the connected device.
Press
SOURCE and use
connected device and wait a few seconds till the picture appears.
Watch TV
HDMI1
Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
1
Press
.
Guide to Home menu
Source
Watch TV
: Switches back to the TV source if another source
Watch TV
is selected.
: To select connected devices.
Source
Home Network : Accesses Home network menus.
: Accesses Net TV menus.
Net TV
: Accesses menus that allow you to change picture,
Setup
sound and other TV settings.
to select the set-top box or the
HDMI2
Video
USB
Home
Net TV
Setup
Network
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1
Press
SOURCE on the remote control.
2
Use
to select a device to lock or unlock.
3
Press
OPTIONS on the remote control.
4
Use
to select Lock or Unlock, then press OK.
•
If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
5
Enter your PIN. Change PIN
Changing device type
You can change device icons displayed in the source list.
1
Press
SOURCE on the remote control.
2
Use
to select the desired device.
3
Press red button on the remote control.
4
Use
to select the desired type, then press OK.
To reset the type
•
Press
OPTIONS on the remote control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in Master EasyLink.
1
Press
SOURCE on the remote control.
2
Use
to move the cursor to any device.
3
Press
OPTIONS on the remote control.
4
Use
to select Scan connections, then press OK.
19
p. 36
p. 32
Continued on next page.
.
English
Advertisement
Table of Contents
