Use Your Tv; Switching On Your Tv And Putting It In Standby Mode; Adjusting Volume; Switching Channels - Philips 6704 Series User Manual

3 Use your TV

Switching on your TV and putting it in
standby mode
TV
Remote control
Turns the TV on and off of standby.
● Press B (POWER) on the TV or the remote control.
Note(s)
●
Energy consumption contributes to air and water pollution. When the AC
power cord is plugged in, your TV consumes energy with a very low standby
power consumption.

Adjusting volume

TV
Remote control
To decrease or increase volume
● Press VOL + / – on the TV or the remote control.
VOL + : Volume up
VOL – : Volume down

Switching channels

To change channels, you can do any of the following:
Press H to change to the next higher channel.
●
Press I to change to the next lower channel.
●
● Press OK to display the channel list (in non-connected mode) or
Smart Guide (in connected mode), and then press H I J K to select
the channel or show you want to watch.
When you've highlighted the channel or show you want to watch,
press OK. (If you decide you don't want to change channels, press
3 (BACK)).
Watching channels from an external
device
On the Android TV home screen, select Inputs in the upper right
corner of the screen, and press OK to switch input device list.
15 .
English