Table of Contents
Advertisement
To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support
3 Use your TV
Watching channels from an
external device
1
Turn on the set-top box or the connected device.
The picture from the set-top box or the connected
device might appear automatically on the TV screen.
If the picture does not appear
2
Press
SOURCE and use
top box or the connected device, then press OK.
3
Use the remote control for the set-top box or the
connected device to select channels to view.
Displaying setup using Home menu
1
Press
to display Home menu.
Home Network
Source
2
Use
to select Setup, then press OK.
Guide to Home menu screen
Home menu start screen
a
b
Home Network
Source
Source
Home Network
Net TV
Wireless Screencasting : Accesses wireless
Setup
Please read the detailed version of this User manual on
www.philips.com/support for more information on menu
features.
to select the set-
Net TV
Wireless
Setup
Screencasting
c
d
e
Net TV
Wireless
Setup
Screencasting
: To select TV source or
connected devices.
: Accesses home network
menus.
: Accesses Net TV menus.
screencasting menus.
: Accesses menus that allow
you to change picture, sound
and other TV settings.
Network
Setup network connection settings in order to use Net
TV or network upgrade functions.
1
Display Setup using Home menu and use
to select Connect to network, then press OK.
Connect to network
Before you proceed to Connection test or other settings in
Network section, run the network settings assistant to
connect the TV to your network.
Wireless setting
Select to use a wireless LAN to connect to the internet by a
wireless connection.
2
Use
to select Wireless, then press OK.
3
Use
to select the desired setting, then press OK, and
follow the on-screen instructions.
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
Easy Connect
connect button on your router. If connection
test fails, refer to the router's manual for more
details.
Search for wireless networks automatically and
select the wireless network name (SSID) from
Scan
the list.
Set up the connection to the wireless LAN
Access Point (AP) (e.g. wireless router)
Manual entry
manually by entering the wireless network
name (SSID).
Wired setting
Select to use an Ethernet cable to connect to the internet by
a wired connection. Please purchase shielded Ethernet
cables at your local store and use it when you connect to
network equipment.
2
Use
to select Wired, then press OK.
Connection test will start automatically. (Refer to Connection
test
p. .)
Connection test
Perform the following steps to test your internet
connection after you have connected an Ethernet
cable or entered network settings such as IP address,
DNS settings, etc. manually.
1
Display Setup using Home menu and use
to select Network settings, then press OK.
2
Use
to select Connection test, then press OK.
Connection test will start automatically and the test result
for home network and internet will appear right after the
connection test finishes.
"Testing..." is displayed while the connection test is in
progress.
8
Continued on next page.
Advertisement
Table of Contents
