Specifications - Biostar H110MDE Manual

Hide thumbs Also See for H110MDE:
Table of Contents

Advertisement

1�3 Specifications

Specifications

CPU Support
Chipset
Memory
Storage
LAN
Audio Codec
USB
Expansion Slots
Rear I/Os
Internal I/Os
Form Factor
OS Support
4 | Chapter 1: Introduction
Socket 1151 for Intel® Core i7 / i5 / i3 / Pentium / Celeron processor
Maximum CPU TDP (Thermal Design Power): 91Watt
* Please refer to www.biostar.com.tw for CPU support list.
INTEL® H110
Supports Dual Channel DDR4 1866/2133/2400
2x DDR4 DIMM Memory Slot, Max. Supports up to 32 GB Memory
Each DIMM supports non-ECC 4/8/16 GB DDR4 module
* DDR4-2400 for 7th Generation Intel® Core™ Processor Family.
* Please refer to www.biostar.com.tw for Memory support list.
4x SATA III Connector
RTL8111G
1x 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
ALC662
5.1 Channels, High Definition Audio
4x USB 3.1(Gen1) port (2 on rear I/Os and 2 via internal header)
6x USB 2.0 port (2 on rear I/Os and 4 via internal header)
1x PCIe 2.0 x1 Slot
1x PCIe 3.0 x16 Slot (x16)
1x PS/2 Mouse
1x PS/2 Keyboard
1x VGA Port
1x DVI-D Port
1x LAN port
2x USB 2.0 Port
2x USB 3.1(Gen1) Port
3x Audio Jack
4x SATA III Connector
2x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1x USB 3.1(Gen1) Header (each header supports 2 USB 3.1(Gen1) ports)
1x 4-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x System Fan Connector
1x Front Panel Header
1x Front Audio Header
1x Clear CMOS Header
uATX Form Factor, 215mm x 170mm
Windows 7/ 8.1(64bit)/ 10(64bit)
* Windows 7 (32/64bit) / 8.1(64bit) for 6th Generation Intel® Core™ Processor Family only.
* Biostar reserves the right to add or remove support for any OS with or without notice.

Advertisement

Chapters

Table of Contents
loading

Table of Contents