NEC PE455UL User Manual page 22

Installation
• 360° installation and portrait projection
The projector can be installed at any angle from 0° to 360° in both the vertical and horizontal
direction. When installing the projector in a tilted position, use brackets of sufficient strength.
Portraits can also be projected with the projection screen tilted 90°. Be sure to assemble and
install a dedicated stand.
• Lens shift mechanism for adjusting the position of the projected image easily
The position of the projected image is moved by turning the two dials on the projector cabinet
top, one for the vertical direction and another for the horizontal direction.
• Correct projected image distortion on specially shaped surfaces
Distortion when projecting on specially shaped surfaces (cylindrical or spherical surfaces, for
example) can be corrected using our Geometric Correction Tool application.
Videos
• Wide range of input terminals (HDMI × 2, etc.)
The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog),
etc. HDMI input terminal on this product supports HDCP.
• [VIEWER] function to project still images saved in a USB memory
When you insert a commercially available USB memory containing the picture into the USB port
of the projector (Type A), the images on the USB can be projected by the unit. By doing this,
you can make a presentation without using a personal computer.
• Seamless switch function for smoother screen changes when switching the signal
When the input connector is switched, the image displayed before switching is held so that that
the new image can be switched to without a break due to absence of a signal.
1. Check the product overview, supplied items and part names
2