Managing pcie adapters for ibm power system l922 9008-22l; ibm power system s922 9009-22a; ibm power system h922 9223-22h; ibm power system s914 9009-41a; ibm power system s924 9009-42a; ibm power system h924 9223-42h; ibm emx0 pcie gen3 i/o expansion dra (226 pages)
Page 1
Serial I/O SST8P DB Adapter 37L1414 Installation Guide OPTIONS by IBM 37L1475 560154/A October 1998 560154_A.p65 11/25/98, 6:52 PM...
Page 2
Reference Manuals located on the CD ROM for detailed Device Driver information.` The IBM Serial I/O Adapter (see Figure 1 below) occupies a single PCI slot in the host computer and provides the intelligent functions to "off-load" the CPU serial communications processing tasks.
Therefore, whenever an Adapter is installed (or removed) in a PCI system, the Adapter is recognized and configured immediately upon restart. IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
Page 4
DB-25 Fan Out Cable to Device Cabling Figures 4 through 6 show the pin outs required to make a cable to go between the DB-25 FOC ports and your terminals, printers, modems, etc. IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
Page 5
Figure 4. Cable Pin Outs for FO-8 DB-25 to Terminal/Printer DB-25 Figure 5. Cable Pin Outs for FO-8 DB-25 to PC DB-9 Figure 6. Cable Pin Outs for FO-8 DB-25 to Modem DB-25 IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
For the support telephone and support hours by country, refer to the following table or to an optional enclosed technical support insert. If the number is not provided in the table or insert, contact your IBM reseller or IBM marketing representative.
/ I l t l u / I l t l u Table 1. Options Parts Names and Numbers Cable Options Please refer to www.equinox.com for cabling alternatives. IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
The warranties provided by IBM in this Statement of Limited War- ranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them.
If a Machine does not function as warranted during the warranty period, IBM or your reseller will repair it or replace it with one that is at least functionally equivalent, without charge. The replacement may not be new, but will be in good working order.
IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.
Limitation of Liability Circumstances may arise where, because of a default on IBM’s part or other liability you are entitled to recover damages from IBM. In each such instance, regardless of the basis on which you are entitled to claim damages from IBM (including fundamental breach, negligence,...
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recom- mended cables and connectors or by unauthorized changes or modifi- cations to this equipment.
Page 13
IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
Page 14
IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
Page 15
IBM Serial I/O SST-8P Installation Guide 560154_A.p65 11/25/98, 6:52 PM...
Need help?
Do you have a question about the 37L1414 and is the answer not in the manual?
Questions and answers