Chapter 2
2. 2. 3.
Method 3: Via the WPS Button
Use this way if your router has a WPS button. The button might look like one of these:
.
1. Press the WPS button on your host router, and then press the WPS button on the
extender for 1 second within 2 minutes.
Note:
For more information about using WPS button on your host router, please refer to the router manufacturer's user
guide.
2. Wait until the Signal LED changes to solid on, which indicates that the WPS connection
is successful.
Note:
If the LED does not turn solid on, try again or refer to
Browser.
3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect
to the other band.
4. Wait until the Signal LED turns solid on, setup is done.
Solid On
Note:
•
If you want to customize the extended network name, refer to
Method 1: Via the TP-Link Tether App
Extended Network Names:
Router's network name with _EXT at the end
Passwords:
Same as your router
Set Up Internet Connection
or
Method 2: Via a Web
To change the wireless network name
(SSID).
12