TP-Link RE205 User Manual page 16

Chapter 2
• If you cannot find the network names with _EXT in your Wi-Fi network list, this means that the extender has
been connected to a OneMesh router and automatically copied its wireless settings. For more information,
refer to OneMesh with Seamless
• For some early firmware versions, the extender share the same network name as your router.
5. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't, relocate
the extender closer to the router to achieve better signal quality.
Tips:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
6. Enjoy! Connect to the extended network and enjoy the internet.
Roaming.
Router
Halfway
Set Up Internet Connection
Suitable location
Too far from router
No connection
Devices
13