Table of Contents
Advertisement
3.4.10
Advanced: Power Management
Options Summary
Power Mode
Select power supply mode.
AC Power Loss
Select power state when power is re-applied after a power failure.
RTC wake system
from S5
Fixed Time: System will make on the hr::min::sec specified.
Dynamic Time: System will wake on the current time + Increase minute(S)
Table Continues on Next Page...
Chapter 3 – AMI BIOS Setup
ATX Type
AT Type
Last State
Power On
Power Off
Disabled
Enabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
82
Advertisement
Table of Contents
