Table of Contents
Advertisement
44
CUSTOMIZING SETTINGS
OPTION settings
1
Press MENU to access the main menus.
2
Press the Navigation buttons to scroll to OPTION and press
OK.
3
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
To choose the language in which the control names are displayed.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Inversion
White Wash
DPM Select
A user can choose to turn the power saving mode on / off.
y
y
y
y
y
y
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Auto
Manual
Factory Reset
Select this option to return to the default factory settings.
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
NOTE
You can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
It makes a little difference according to your environment.
It may not be supported depending on the model.
Stops auto switch of the input source.
Switches to another input source with video signal if no video signal comes
from the current input source.
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
OPTION
Language
Power Indicator
ISM Method
DPM Select
Fail Over
Factory Reset
Set ID
Tile Mode
PIP/PBP
Key Lock
USB Content Recovery
Product/Service Info.
Description
Move
OK
: Normal
: On
: Off
: 1
: Off
: Off
Advertisement
Table of Contents
