Option Settings - LG 55LV77A-5B.AEK Owner's Manual

OPTION Settings

1
Press SETTINGS to access the main menus.
2
Press the navigation buttons to scroll to
OK.
3
Press the navigation buttons to scroll to the setting or option
you want and press OK.
- To return to the previous level, press BACK.
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Inversion
White Wash
DPM Select A user can choose to turn the power saving mode on / off.
y
y
y
Fail Over If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Auto
Current
Input Source
Manual
Factory Reset Select this option to return to the default factory settings.
OPTION
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
NOTE
You can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
It makes a little difference according to your environment.
It may not be supported depending on the model.
Stops auto switch of the input source.
Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Attempt 1
RGB HDMI
DVI HDMI
HDMI DVI
DP HDMI
The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current
input source remains.
OPTION
• Language
• ISM Method
• DPM Select
and press
• Fail Over
• Factory Reset
• Set ID
• Tile Mode
• PIP/PBP
• Fan
• USB Content Recovery : Off
• SIMPLINK
• Product/Service Info.
Description
Attempt 2 Attempt 3
DVI
DP
DP
DVI
CUSTOMIZING SETTINGS
Move
: Normal
: On
: Off
: 1
: Off
Attempt 4
DP If there is no
available video
RGB
signal to switch to,
RGB
then the current
input source
RGB
remains.
47
OK
ꔋ