Taking Pictures With Flash; Tz110/Zs110 - Panasonic Lumix DMC-ZS110 Operating Instructions For Advanced Features

Hide thumbs Also See for Lumix DMC-ZS110:
Table of Contents

Advertisement

Taking pictures with flash

Recording mode:
With the flash you can take pictures in dark places or adjust the entire contrast of a
picture by illuminating a subject with a bright background.
Open/Close the built-in flash

TZ110/ZS110

To open the flash
Slide the flash open lever.
• Be careful when opening the flash as the flash
will jump out.
To close the flash
Press the flash until it clicks.
• Be careful not to catch a finger or any other
part of your body or any object when you close
the flash.
• Forcibly closing the flash can damage the camera.
• Be sure to close the built-in flash when not in use.
• The flash setting is fixed to [
closed.
Use / Do not use flash
TZ80/ZS60
You can record with flash as appropriate to the recording mode.
Setting the way the flash works
If you do not wish to use flash,
press the [ ] button ( ) and select [
The flash is fixed to [
• During motion picture recording
• When recording 4K photos
• When recording using [Post Focus]
• When using the electronic shutter
• When [HDR] is set to [ON]
• When [Silent Mode] is set to [ON]
• When a picture effect in [Filter Effect] of [Filter Settings] is set
241
] while the flash is
(→244)
] (Forced Flash Off).
] (Forced Flash Off) in the following cases:
Stabiliser, Zoom and Flash
SQW0566

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents