Table of Contents
Advertisement
28
Operating
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press TUNER on the unit or FUNCTION on the
remote control until FM or AM appears in the
display window.
2. Press TUNING-/+ on the remote control or
Y/U on the unit to select a desired
frequency.
3. Press TUNER MEMORY. A preset number will
blink in the display window.
4. Press PRESET.FOLDER W/S to select the
preset number you want.
3
5. Press TUNER MEMORY. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold TUNER MEMORY for two
seconds.
"ERASE ALL" will flash up on the unit display.
2. Press TUNER MEMORY to erase all the saved
radio stations.
CM9940-AB_DPERLLK_ENG.indd 28
Other Operations
Turn off the sound temporarily
Press MUTE@ to mute your remote control.
You can mute your unit, for example, to answer
the telephone, the mute icon "Q" is blinked in the
display window.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
DEMO
In the power off state, it demonstrates the function
on display window with a demo sound and a
display by pressing SPK LIGHTING/DEMO.
To cancel the DEMO, press it again.
,
Note
y While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
y You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without input key in 10 sec, the DEMO will
play back automatically.
2014-02-26
2:50:57
Advertisement
Table of Contents
