Stacking The Speakers - LG NS9940F Owner's Manual

Stacking the speakers

You can listen to the best sound quality when you
stack the speakers. Refer to the below.
Before stacking
You have to position the unit and the speakers
before connecting the speakers. Note that the
illustrations below are differ from the actual unit.
Stacking the speakers
1. You install SWF(Subwoofer) SPK on a flat surface.
(It is recommended that at least two people to
carry by left and right handle (C)).
2. As shown below, FRONT SPK place on
SWF(Subwoofer) SPK.
CM9940-AB_DPERLLK_ENG.indd 15
FRONT SPK
SWF(Subwoofer) SPK
(C)
3. FOOT (A) of FRONT SPK is mounted on the top of
the guide hole (B) of SWF(Subwoofer) SPK.
(A)
(B)
>
Caution
y Install the speakers on a firm surface not to
slide.
y If the speakers DON'T install on firm surface
or FOOT (A) of FRONT SPK is NOT mounted
appropriately on the top of the guide hole
(B) of SWF(Subwoofer) SPK, the vibration
caused by the strong output can shake and
move the speakers and make noise.
Connecting 15
2
2014-02-26 2:50:47