Freezer Care; Cleaning Your Frost-Free Freezer; Changing The Light Bulb - Whirlpool EV188NYWQ00 Use & Care Manual

Cleaning Your Frost-Free Freezer

WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Frost-free means that you will not have to defrost your freezer.
Frost is removed by air moving and collecting any moisture and
depositing it on the cooling coil. The cooling coil periodically
warms up enough to melt the frost, and it then flows down to the
drain pan (located behind the base grille) where it is evaporated.
Complete cleaning should be done at least once a year.
1. Turn temperature control to OFF position. See "Electrical
Requirements."
2. Unplug freezer or disconnect power.
3. Remove all frozen food. Wrap frozen food in several layers of
newspaper and cover with a blanket. Food will stay frozen for
several hours. You may also store frozen food in a cooler,
additional refrigerator-freezer, or in a cool area.
4. Remove all removable parts from inside, such as shelves,
bins, etc.
5. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt [26 g
to 0.95 L] of water).
6. Replace the removable parts.
7. Use the appropriate cleaning method for your exterior finish.
Painted metal: Wash exteriors with a clean sponge or soft
cloth and a mild detergent in warm water. Do not use abrasive
or harsh cleaners, or cleaners designed for stainless steel. Dry
thoroughly with a soft cloth.
Stainless steel finish: Wash with a clean sponge or soft cloth
and a mild detergent in warm water. Do not use abrasive or
harsh cleaners. Dry thoroughly with a soft cloth.
To keep your stainless steel freezer looking like new and to
remove minor scuffs or marks, it is suggested that you use
the manufacturer's approved Stainless Steel Cleaner and
Polish.
10

FREEZER CARE

IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to
come into contact with any plastic parts such as the trim
pieces, dispenser covers or door gaskets. If unintentional
contact does occur, clean plastic part with a sponge and
mild detergent in warm water. Dry thoroughly with a soft
cloth.
8. Clean the condenser coils regularly. Coils may need to be
cleaned as often as every other month. This may help save
energy.
Open the freezer door and remove the base grille by
pulling down and out from the top.
Remove the defrost pan and clean it using a clean sponge
or soft cloth and a mild detergent in warm water. Hand
wash, rinse, and dry it thoroughly.
Use a vacuum with an extended attachment to clean the
condenser coils when they are dusty or dirty.
Replace the defrost pan.
Replace the base grille by putting the clips in the openings
in the freezer panel. Push in until the base grille snaps into
place.
9. Replace all frozen food.
10. Plug in freezer or reconnect power.
11. Turn temperature control to desired setting. See "Using the
Control."
NOTE: Not all appliance bulbs will fit your freezer. Be sure to
replace the bulb with an appliance bulb of the same size, shape,
and wattage (no greater than 40 watts).
1. Unplug freezer or disconnect power.
2. Remove the light shield. From the front of the light shield,
push backward and down.
3. Replace the burned-out bulb with an appliance light bulb no
greater than 40 watts.
4. Replace the light shield.
5. Plug in freezer or reconnect power.

Changing the Light Bulb