Table of Contents
Advertisement
Before Operation-VCR part
How to use the main menu
This DVD+VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
1. Switch on your TV set and DVD+VCR by pressing the
POWER button.
2. Press i button.
The main menu will appear on the TV screen.
1 2
SET
f
OSD
OSD
ON
OFF
REC - Timer recording setting (see p. 22).
PR SET - Manual tuning setting (see p. 14).
ACMS - ACMS (Automatic Channel Memory
System) (see p. 13).
SET - Date & clock setting (see p. 12).
SYS - To set the Colour TV System (see p. 12).
1 W ON/OFF - Power Save Mode (see p. 25).
(Dr.) - To check a problem with your VCR
(see p. 25).
F.OSD ON/OFF - To display the operational
mode of your VCR
(see p. 24).
(OPR) - To improve the playback picture
(see p. 20).
Appear when playback only.
Tip
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 17.)
3. Press 1 and 2 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
4. Press i to return to a TV picture.
SYS
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
turn to the MANUAL TUNING section on page 14.
1. Press POWER to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press ENTER/OK.
1 2
Pr-12
SET
SYS
ACMS
Pr-12
ACMS
f
OSD
OSD
ON
OK i
OFF
3. Press OK again to start the automatic tuning
process.
01
C02
02
C03
03
C04
S
Pr-12
ACMS
4. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
01
C02
02
C03
03
C04
04
C05
05
C06
06
C07
07
C08
08
C09
P SET
R
ACMS
Pr-12
OK i
ACMS
00
PR-01
00
PR-02
00
PR-03
E
i
00
PR-01
00
PR-02
00
PR-03
00
PR-04
00
PR-05
00
PR-06
00
PR-07
00
PR-08
MOVE :
DELETE :
,
OK i
13
Advertisement
Table of Contents
