Table of Contents
Advertisement
The Front Panel
PITCH WHEEL and MODULATION WHEEL
PITCH WHEEL and MODULATION WHEEL
Use each wheel to respectively perform pitch bends or vary the modulation amount. The
MODULATION WHEEL will perform a pre-assigned modulation for each Program or Multi.
The name of the current assignment is shown in the LCD display when the wheel is moved.
VARIATION Button
Pressing the VARIATION button will perform a pre-assigned variation for each Program or
Multi. The name of the current assignment is shown in the LCD display when the button is
pressed.
The VARIATION button has two states, off (not lit) and on (lit). The VARIATION button
will typically modify the sound by adding an orchestral string section or synth pad layer, or
enabling an effect.
For KB3 Organ Programs, the VARIATION button controls the Rotary Speaker speed,
changing between fast and slow. The LCD display shows "KB3" when a KB3 Program is
selected.
KNOBS
The KNOBS are used to control various Program and Multi parameters. Press the SHIFT
button to shift between 3 rows of 4 knob assignments.
In Program Mode: The top row of knob assignments control user-assignable parameters, and
the bottom two rows of knob assignments perform the functions labeled on the front panel.
The top row of user-assignable parameters can be adjusted in Program Edit Mode.
In Multi Mode: The top row of knob assignments control Multi Zone volumes, and the
bottom two rows of knob assignments perform the functions labeled on the front panel. For
the bottom two rows of KNOBS, value scaling and offset can be adjusted per Zone for each
knob in Multi Edit Mode. This allows each knob range to be adjusted or disabled per Zone.
In Program and Multi Mode: When a KB3 Organ Program is selected, some of the knobs
may perform Organ drawbar functions instead of the functions labeled on the front panel. The
LCD display shows "KB3" when a KB3 Program is selected.
SHIFT Button
The SHIFT button allows you to shift between 3 groups of knob assignments. The available
knob assignments are labeled in 3 rows below the knobs. Press the SHIFT button to shift to
the next assignment group, indicated by a lit LED to the left of each row.
ARP ON/OFF Button
Use the ARP ON/OFF button to turn on and off the SP6's Arpeggiator.
6
GETTING STARTED GUIDE
Advertisement
Table of Contents
