Brother TD-4520DN User Manual page 88

• Align Paper Leading Edge when the Cover is Closed
Selects whether the paper is automatically fed when the cover is closed.
• Exit Position
Selects the media output location.
• Auto Cut
Sets the cutting method when printing multiple labels.
• Auto Speed Configuration
Automatically adjusts the printing speed and prints at the optimal print density.
Advanced Tab
• Feed Key Function
Selects the operation performed when
the command file.
• Function Key Function
Selects the operation performed when
the command file.
If the Cutter is attached, manual cutting can be set using the Function Key.
• Print Information Report
Selects the information you want to include in the printer Information Report.
• JPEG Printing Setting
Selects the method of image processing when printing JPEG images.
• Serialize Mode
Specifies the serialise (number) method for your printed labels.
• Save Printer Print Log
Selects whether to save the printer's print log. If Disable is selected, the Save Print Log in File option
cannot be enabled.
• Print Data after Printing
Specifies whether print data is erased after printing.
Print Position / Sensors Tab
If RD Rolls are being used, it is unnecessary to adjust the sensors.
• Printing Reference Point Adjustment
Adjusts the position of the reference point (point of origin for printing). This corrects printing misalignments
resulting from differences in printer models or from the fixed margins of some software.
The reference point cannot be adjusted for raster printing.
• Tear Adjust
Adjusts the tear bar tear-off position for paper media.
• Media Sensor (Transmissive/Gap)
- Detection Sensitivity
Adjusts the sensitivity of gap (spacing) detection for die-cut labels.
- Luminescence Adjustment
Adjusts the amount of light emitted by the transmissive/gap sensor.
• Media Sensor (Reflective/Bar)
- Mark Detection Sensitivity
Adjusts the sensitivity of black mark detection.
- Luminescence Adjustment
is pressed. If Program Settings is selected, click File and select
is pressed. If Program Settings is selected, click File and select
85