Brother TD-4520DN User Manual page 83

Saves the current settings in a file. If the Disable these settings check box is selected, the settings are not
saved.
Exported files are not encrypted.
Tools Menu Options
• Option Settings
- Automatically restart the printer after applying new settings
If this check box is selected, the printer automatically restarts after communication settings are applied. If
this check box is cleared, you must restart the printer manually.
When configuring multiple printers, you can reduce the time needed to change settings by clearing this
check box. In this case, we recommend selecting this check box when configuring the first printer so that
you can confirm that each setting is operating as intended.
- Automatically detects the connected printer, and retrieves the current settings
If this check box is selected and a printer is connected to the computer, the printer is automatically
detected and the printer's current settings are displayed in the Current Status pane.
If the connected printer is different from the printer shown in the Printer drop-down list, the settings
available on all tabs change to match the connected printer.
• Change Node Name/Bluetooth Device Name
Allows renaming a node name.
• Reset to Default Communication Settings
Returns the communication settings to their factory settings.
Help Menu Options
• Display Help
Displays the Help topics.
General Tab
IPv6
• IPv6 usage
Selects Enable or Disable.
• Priority on IPv6 address
Selects to give priority to an IPv6 address.
Wired LAN Tab
TCP/IP
• Boot Method
Selects the AUTO, BOOTP, DHCP, RARP, or STATIC option.
• IP Address/Subnet Mask/Gateway
Specifies the various networking values. You can enter these settings only when the IP address is set to
STATIC.
• DNS Server Method
Selects the AUTO or STATIC option.
• Primary DNS Server IP Address/Secondary DNS Server IP Address
You can enter these settings only when the DNS server is set to STATIC.
IPv6
• Static IPv6 Address
Specifies a permanent IPv6 address.
80