Mounting On A Table - LG 50LA6130.ATR Owner's Manual

CAUTION
y When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
y Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after
being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and
not tighten correctly.
NOTE
y Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
ASSEMBLING AND PREPARING
Using the Kensington security system
(This feature is not available for all models.)
The Kensington security system connector is located at
the rear of the TV. For more information of installation and
using, refer to the manual provided with the Kensington
security system or visit http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
Adjusting the angle of the TV to suit view
(Only LA61**)
Swivel 15 degrees to the left or right and adjust the angle
of the TV to suit your view.
15
CAUTION
» When adjusting the angle adof the product, watch
y
out for your fingers.
» Personal injury may occur if hands or fingers are
y
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
<Rear>
15
15
<Front>