Attaching The Tv To A Desk; Mounting On A Table - LG 70UT640S Series Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• Do not move the TV by holding the cable holders, as the

cable holders may break, and injuries and damage to the

TV may occur.

• When attaching the stand to the TV set, place the screen

facing down on a cushioned table or flat surface to protect

the screen from scratches. (Depending on model)

Mounting on a Table

(Depending on model)

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper

ventilation.

(Depending on model)

2 Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to the

screw parts when assembling the product. (Doing so may

damage the product.)

• If you install the TV on a stand, you need to take actions

to prevent the product from overturning. Otherwise, the

product may fall over, which may cause injury.

• Do not use any unapproved items to ensure the safety and

product life span.

• Any damage or injuries caused by using unapproved items

are not covered by the manufacturer's warranty.

• Make sure that the screws are inserted correctly and fastened

securely. (If they are not fastened securely enough, the TV

may tilt forward after being installed.) Do not use too much

force and over tighten the screws; otherwise screw may be

damaged and not tighten correctly.

10 cm