Table of Contents
Advertisement
16
ASSEMBLING AND PREPARING
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
(Only 32/37/39/42/47/50/60LN54**, LN565*)
(Only LA61**)
M4 x 8 (Only 32/42LA61**)
P4 x 8 (Only 50LA61**)
2EA
CAUTION
(Only LA61**)
How to fix the TV to a table
1. Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2. Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3. Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
WARNING
y To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
Securing the TV to a wall
(This feature is not available for all models.)
1
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly with a
sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
y Make sure that children do not climb on or hang
on the TV.
NOTE
y Use a platform or cabinet that is strong and large
enough to support the TV securely.
y Brackets, bolts and ropes are not provided. You
can obtain additional accessories from your local
dealer.
Advertisement
Table of Contents
