Table of Contents
Advertisement
q
w
4
r
e
w
START
STOP
q
e
BASIC SEWING
Straight Stitch Sewing
q Stitch pattern:
w Needle thread tension:
e Presser foot:
Starting to sew
Raise presser foot and position the fabric next to a seam
guide line on the needle plate. Lower the needle to the
point where you want to start.
Pull the thread(s) toward the rear and lower the presser
foot.
Press the start/stop button or depress the foot control to
start sewing.
Gently guide the fabric along a seam guide line letting
the fabric feed naturally.
q Start/stop button
To secure the beginning of seam, sew several reverse
stitches by pressing the reverse button.
w Reverse button
NOTE:
When sewing with the satin stitch foot or buttonhole foot,
pull the thread(s) to the left to hold them.
Sewing from the edge of thick fabric
The black button on the zigzag foot locks the foot in the
horizontal position.
This is helpful when starting sewing from the far edge of
thick fabrics or sewing across a hem.
Lower the needle into the fabric at the point where you
wish to start sewing.
Lower the foot while pushing the black button in. The foot
is locked in the horizontal position to avoid slipping.
The button is released automatically after sewing a few
stitches.
e Black button
r Thick fabrics
19
01 or 02
2 to 6
Zigzag foot A
Advertisement
Table of Contents
