Needle Threader - Necchi EX30 Instruction Book

q
w
e
r
y

Needle Threader

CAUTION:
Turn off the power switch when using the needle
threader.
Lower the presser foot. Raise the needle to its highest
position.
Pull down the needle threader knob as far as it will go.
The hook comes out through the needle eye from
behind.
q Knob
w Hook
w
Draw the thread from the left guide to the right guide and
under the hook.
Draw the thread up along the right side of the right guide
and slip the thread in between guide and the holder
plate.
t
e Left guide
r Right guide
t Holder plate
r
Raise the knob in the direction of the arrow, drawing the
thread loop through the needle.
y
Thread loop
Pull the thread through the needle eye.
NOTES:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90
are recommended.
The needle threader cannot be used for a twin needle.
17