Canon MX475 Online Manual page 829

Table of Contents

Advertisement

1303
Cause
Paper is jammed inside the machine at the transport unit.
Action
If you can see the jammed paper at the front tray, or you cannot see the paper either at the paper output
slot or at the front tray, remove the paper from the transport unit.
Remove the paper following the procedure below.
Watch the movie (Windows)
Watch the movie (Mac)
Important
• The power cannot be turned off while the machine is sending or receiving a fax, or when the received
fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the
power cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
Note
• If you need to turn off the machine to remove jammed paper during printing, press the Stop button to
cancel print jobs before turning off the machine.
1. Turn the machine off, then unplug the power cord.
2. Open the document tray, then open the document cover.
3. Stand the machine with the right side facing down.
If you can see the jammed paper at the front tray, stand the machine with the front tray open.
Important
• Stand the machine on a wide and flat surface such as a desk.
• When you stand the machine, hold it securely and be careful not to hit it on a hard object.
4. Push the open lever to open the transport unit.
When you open the transport unit, support the machine with your hand so that it does not fall down.
829

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx470 series

Table of Contents