Canon MX475 Online Manual page 153

Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded into this
machine.
When the paper width detected by the machine differs from the width of the paper specified in
Page Size on the Page Setup tab, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
Important
• If you are using user-defined paper, use the Custom Paper Size to correctly set the size of
the paper loaded in the machine.
If an error message is displayed even though the same size that was set is loaded, clear the
check box.
Ink Drying Wait Time
You can set the length of the machine rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page
dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
4. Apply the settings
Click OK and when the confirmation message appears, click OK.
The machine operates with the modified settings hereafter.
153