Canon MX475 Online Manual page 687

Using the Rotary Pulse Line
• Dialing by Using the On Hook Dial Function
Note
• You can use the on hook dial function only when On-hook setting in Security control under
Fax settings is set to Enable.
Security control
1. Make sure that the machine is turned on.
2. Press the FAX button.
The Fax standby screen is displayed.
3. Press the Color button or the Black button.
4. Use the Numeric buttons to dial the number of the information service.
5. When the recorded message for the information service answers, press the Tone button to
switch to tone dialing.
6. Use the Numeric buttons to press the numbers in accordance with the message.
7. Press the Stop button to finish using the service.
• Dialing by Using the Telephone Connected to the Machine
1. Make sure that the machine is turned on.
2. Press the FAX button.
The Fax standby screen is displayed.
3. Lift the handset of the telephone.
4. Use the telephone to dial the number of the information service.
5. When the recorded message for the information service answers, use the telephone to switch to
tone dialing.
When you dial the number of the information service using the telephone connected to the
machine, you cannot use the machine to switch to tone dialing. For instructions on how to switch
to tone dialing, refer to your telephone's instruction manual.
6. Use the telephone to press the numbers in accordance with the message.
7. Hang up the handset to finish using the service.
687