Change Settings; Access The Setup Menu; Change Video Settings - Philips 39PFL3108K/12 User Manual

4
Select [EasyLink] > [EasyLink] , then press
OK .
5
Select [On] , then press OK .
6
You can now enjoy the following Philips
EasyLink controls.
One-touch play
When you play a disc, the TV automatically
switches to the correct channel.
One-touch standby
When you press and hold
remote control, the home theater and all the
connected HDMI CEC devices (if they support
one-touch standby) switch to standby mode
simultaneously.
System Audio Control
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, enable this feature and
follow the instructions on the TV to map the
connected devices correctly to the audio input
jacks of the home theater.
Audio Input Mapping
Updates audio input mapping if there are new
devices connected.
18 EN
( Standby ) on the
5

Change settings

This section helps you to change the settings of
your home theater.
Caution
• Most of the settings are already confi gured
with the best value for the home theater.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.

Access the setup menu

1
Press ( Home).
2
Select [Setup] , then press OK .
» The setup menu appears.
3
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
4
Press BACK to return to the previous
menu, or press
Note
• You cannot change a setting that is grayed out.

Change video settings

1
Press ( Home).
2
Select [Setup] , then press OK .
3
Select [Video] , then press OK .
4
Select and adjust the following settings:
• [TV Display] : Selects a picture display
format to fi t the TV screen.
•
[HDMI Video] : Selects the HDMI
video resolution.
•
[HDMI Deep Color]: Displays colors
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
•
[Component Video] : Selects the
component video resolution. Copy-
protected DVDs can display only
480p/576p or 480i/576i.
to exit.