Use Your Home Theater; Before You Start; Access The Home Menu; Choose Your Sound - Philips 39PFL3108K/12 User Manual

4 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.

Before you start

Check that you:
•
Make the necessary connections
described in the Quick Start and User
Manual.
•
Complete the fi rst time setup. First
time setup appears when you turn on
the home theater for the fi rst time. If
you do not complete the setup, you
are prompted to complete it each time
you turn on the home theater.
•
Switch the TV to the correct source
for the home theater.

Access the home menu

The home menu gives you easy access to
connected devices, audio and video settings, and
other features.
1
Press ( Home).
» The home menu appears.
2
Press the Navigation buttons and OK to
select the following:
•
[play Disc] : Starts disc play.
• [browse USB] : Accesses the content
browser of the connected USB storage
device.
•
[browse iPod] : Accesses the content
browser of the connected iPod or
iPhone.
•
[browse Net TV] : Accesses Net TV.
•
[Setup] : Accesses menus to change
picture, sound and other settings.
•
[User Manual] : Launches the
electronic user manual.
Note
• Net TV feature only available in Latin America.

Choose your sound

This section helps you choose the ideal sound for
your video or music.
1
Press SOUND SETTINGS /
(Sound OPTIONS).
2
Press the Navigation buttons (left/right) to
access the sound OPTIONS.
Sound experience Description
AUTO VOLUME Sets a constant output signal
at the speaker output. This
option is best for TV audio
input where the commercial
signal level is usually higher
than the content.
SOUND Selects a sound mode.
SURROUND Selects a surround sound or
stereo sound.
TREBLE Adjusts the high frequency
output.
MID Adjusts the middle
frequency output.
BASS Adjusts the low frequency
output.
AUDIO SYNC Delays the audio to match
the video.
3
Select an option, then press OK .
4
Press BACK to exit.
If you do not press a button within fi ve
seconds, it automatically exits the menu.
Change auto volume
Select the level of volume which output from
your TV or other devices to the home theater.
1
Press SOUND SETTINGS /
(Sound OPTIONS).
2
Select AUTO VOLUME , then press OK .
3
Press the Navigation buttons (up/down) to
select ON or OFF .
4
Press OK to confi rm your choice.
EN 11