Additional Information; Installing The Tv To The Wall - Sony Bravia KD-70X690E Operating Instructions Manual

Additional Information

Installing the TV to the Wall

This TV's instruction manual only shows the
steps on preparing the installation of the TV
before installing to the wall.
Your TV can be mounted on a wall using a
Wall-Mount Bracket (not supplied) out of
the box as packaged. If the Table-Top Stand
is attached to the TV, the TV may require
detaching the Table-Top Stand; see page 41
(Detaching the Table-Top Stand from the
TV).
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required
in installing this TV, especially to
determine the strength of the wall for
withstanding the TV's weight.
• The length of the screw for Wall-Mount
Bracket differs depending on the Wall-
Mount Bracket thickness. Please see
below illustration.
8 mm - 12 mm
Screw (M6)
Wall-Mount Bracket
TV's rear cover
• Be sure to store the unused screws and
Table-Top Stand in a safe place until
you are ready to attach the Table-Top
Stand. Keep the screws away from
small children.
Note Note
• Read the supplied Safety Booklet for additional
safety information.
1
Remove the screws from the rear of
the TV.
2
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
Wall-Mount Bracket (not supplied)
Note Note
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
3
Detaching the Table-Top Stand from
the TV.
To detach the Table-Top Stand from the
TV, remove the screws.
Screw (not supplied)
41
US
US