Table of Contents
Advertisement
Is telephone line cable connected to external device jack?
Check4
Reconnect it to the telephone line jack.
Connecting Telephone Line
Check the operation panel is open.
Check5
If the operation panel is closed, received faxes will be stored in the printer's memory without being printed
(Memory Reception). Open the operation panel, and then press the OK button.
Is paper loaded?
Check6
If paper is not loaded, received faxes will be stored in the printer's memory without being printed (Memory
Reception). Load paper, and then press the OK button.
Is a different size of paper from that specified by Page size in Fax paper
Check7
settings loaded?
If a different size of paper from that specified by Page size is loaded for printing faxes, the received faxes will not
be printed and will be stored in the printer's memory (Memory Reception). Load the same size of paper as that
specified by Page size, then press the OK button.
Is printer set to appropriate receive mode?
Check8
Check the receive mode setting and change it to a mode suited to your connection if necessary.
Setting Receive Mode
Is Fax RX reject set to ON?
Check9
Select OFF for Fax RX reject in Security control under Fax settings.
For details, refer to Rejecting Fax Reception.
Are there setting items set Reject in Caller rejection?
Check10
If you select Reject for any setting items in Caller rejection in Security control under Fax settings, the printer
rejects calls for setting item selected Reject.
For details, refer to Using Caller ID Service to Reject Calls.
535
Hide quick links:
Advertisement
Table of Contents
