Panasonic Lumix DMC-G7KS Owner's Manual page 311

11. Using the Wi-Fi function
Sending an image each time a recording is made ([Send Images While
Recording])
1
Select the menu.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] > [AV device]
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
5
Take pictures.
•
To terminate the connection, follow the steps below:
>
MENU
•
You can terminate the connection or change the send settings by pressing [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
Select and send the images ([Send Images Stored in the Camera])
1
Select the menu.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images Stored in the Camera] > [AV device]
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
5
Select [Single Select] or [Multi Select].
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected
again.
2 Select [OK].
•
The number of pictures that can be sent by [Multi
Select] is limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
To change the send settings on a screen that is displayed after the image has been sent,
press [DISP.]. To terminate the connection, select [Exit].
(P63)
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes]
(P63)
(P328)
(P336)
(P328)
(P336)
311
(P292)