5. Focus and Brightness (Exposure) Settings
When selecting [
When [
] is selected, you can change the vertical size
and position; when [
horizontal size and position.
Button operation
3/4/2/1
/
[DISP.]
When selecting [
Touch operation
Drag your finger over the parts you want to set as AF
areas.
•
If you touch one of the selected AF areas, the selection of
the area will be canceled.
Button operation
Press 3/4/2/1 to select the AF area, and then press [MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed again.
•
If you press [DISP.], all the selections will be canceled.
6
Press [Fn2].
Registering the set AF area to [
∫
1
On the screen in step
2
Press 3/4 to select a destination to which the setting will be registered, and
press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
Settings registered to
•
Turning off this unit will return the setting adjusted with
•
If you press a cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the
AF area setting screen will be displayed.
]/[
]
] is selected, you can change the
Touch
operation
Touching
Pinching in/out
[Reset]
]/[
]/[
]/[
FREE
], [
3
on P155, press 3 .
/
/
will be stored even after this unit is turned off.
Description of
operation
Moves the
position
Changes the size
(Up to 3 lines)
Restores the
default setting
]
] or [
]
/
/
FREE
156
back to the default setting.