Setting The Flash Functions; Changing The Firing Mode - Panasonic Lumix DMC-G7KS Owner's Manual

8. Stabilizer, Zoom and Flash

Setting the Flash Functions

Changing the firing mode

Applicable modes:
Select whether to set the flash output automatically or manually.
1
Select the menu.
>
MENU
2
Press 3/4 to select the item and then press [MENU/SET].
[TTL]
[MANUAL]
•
When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on the flash icon on the
screen.
•
This item is not available when an built-in flash is being used.
Setting the output ratio manually
1
Select the menu.
>
MENU
2
Press 2/1 to select an item and then press [MENU/SET].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
•
This item is available only when [Firing Mode] is set to [MANUAL].
(P63)
[Rec] > [Flash] > [Firing Mode]
The camera automatically sets the flash output.
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may
otherwise be too brightly lit by the flash.
(P63)
[Rec] > [Flash] > [Manual Flash Adjust.]
233