Software Installation - Gear Head WP7000U User Manual

Software Installation:

Your Wireless Presenter comes with Presenter Mouse software that integrates with your Windows
software allows you to assign special functions to the 3 programmable buttons on your Wireless Presenter. To install the Presenter Mouse
software, please follow the instructions below:
1. If you have installed any other mouse drivers/software onto your computer, please uninstall them prior to the installation of the
Presenter Mouse software to avoid any software conflicts.
2. Place the Driver CD into the CD-ROM drive of your computer.
3. The Presenter Mouse setup screen will start automatically. If the setup screen does not start automatically, click "Start", then
"Run...", type "D:\SETUP.EXE" into the dialog box (NOTE: "D:\" represents the drive letter assigned to the CD-ROM drive
you are using. If D is not the letter assigned to your CD-ROM drive, replace D with the appropriate drive letter.), then click "OK".
4. Select your language, then click "Continue", and then click "Continue" again to confirm the installation.
5. During the installation, the Windows
continue.
12
® Logo verification dialog box may appear more than once, click "Continue Anyways" to
® Mouse Properties. The Presenter Mouse