JVC HR-XV3AS Instruction Manual page 73

Manual Channel Set
Store channels that were not stored during Auto Set Up
( pg. 13) or Auto Channel Set (
A
Access the Main Menu screen.
Press SET UP MENU.
B
Access the Tuner Set screen.
Press rt to move the highlight bar (pointer) to "TUNER
SET", then press OK or e.
C
Access the channel list.
Press rt to move the highlight bar (pointer) to "CH
EDIT", then press OK or e.
D
Select the channel position.
Press rt to move the highlight bar (pointer) to an open
channel position, then press OK or e.
E
Select the band.
Press rt to move the highlight bar (pointer) to the
desired band, then press OK to initiate Manual Channel
Set.
BAND SELECT
VHF L VHF L
VHF H
UHF
pg. 72).
MANUAL CH SET
PLEASE WAIT
VHF L 300MHZ
[MENU] : EXIT
F
Set the station.
The screen to the right
appears when the station is
detected.
If you do not want to store
the detected station...
Press rt to move the
highlight bar (pointer) to
"CONTINUE" then press
OK or e. Channel search
will resume.
If you want to store the detected station...
Press rt to move the highlight bar (pointer) to "STORE",
then press OK or e. The Channel List appears again.
● The blueback screen and the TV picture currently being
broadcast appear alternately for 8 seconds each.
● If you want to store another channel, repeat steps D – F.
● When channel search completes for that band, the Band
Select screen appears again. To set channels for other bands,
select another band and start Manual Channel Set again (
steps E and F).
G
Return to the normal screen.
Press SET UP MENU.
● To change positions, see "Swap Channel Position" (
73
EN
STORE
CONTINUE
pg. 74).